Spettacolare simulatore, ti permette di guidare la linea M3 della metropolitana di Milano

Spectacular simulator online, allows you to drive the M3 metro line of Milan, Italy. The controls are very simple


Line Three, styled as Linea Tre in Italian, is the third subway to have been built in Milan. Construction began in 1986 in order to be ready for the 1990 Football World Cup. It is also called the Yellow Line (Linea Gialla) as it is identified by yellow signage.

Simulator (click image to enter)


Simulatore metropolitana
Simulatore metropolitana  / Simulator metro line

How to Play (Before you start read the following instructions)

Where you read "Come giocare"
Bar shows the correct position at the station stopping point.
Red: Item not reached.
Green: point reached.
Be careful not to exceed the checkpoint.

Where you read "Le tratte in grigio …"
Sections in gray are subject to limits
speed. Exceeding the speed limit
indicated you will lose points and stress
passengers will increase.
The speed limit is also indicated in
Main Display.

In the boxes on the right
Maneuvering the subway abruptly forces are created inside.
If G + or G-above the threshold stress of passengers will increase.
If this exceeds its tolerance level will lower the final score if the stress reaches the maximum limit the race will end.
The percentage of "user stops" indicates the number of passengers aboard each stop. is necessary to transport all passengers to get a good final score.

Where you read "INIZIA" (Starts)
The yoke used to control the train (control with mouse).
Dragging upward increases power, apply downward brakes. The data are shown in the display.
The left button opens the doors. From operate only when the train is stopped at the station.
The right button activates the siren closing doors, always activate before closing the doors.

The display with the words green
Power
Brakes
Speed
Limit
Km covered
Errors maneuver
Push effect
G +
G
Stress passengers
User stops
Total Users
Next stop in
Delay

_____________
Italian version
Versione aggiornata – Spettacolare simulatore, ti permette di guidare la linea M3 della metropolitana di Milano, Italia.

Come giocare
La barra di posizione in stazione indica il corretto punto di arresto.
Rossa: punto non raggiunto.
Verde: punto raggiunto.
Attenzione non superare il punto di arresto.

Le tratte in grigio sono soggette a limite
di velocità. Superando il limite di velocità
indicato si perderanno punti e lo stress
dei passeggeri aumenterà.
Il limite di velocità è anche indicato nel
display principale

Manovrando la metro in modo brusco si creano delle forze all’interno.
Se G+ o G- superano la soglia di tolleranza lo stress dei passeggeri aumenterà.
Questo se supera la propria soglia di tolleranza abbasserà il punteggio finale se lo stress raggiunge il limite massimo la corsa terminerà.

La percentuale "Utenti fermata" indica la quantità di passeggeri saliti a bordo per ogni fermata. E’ necessario trasportare tutti i passeggeri per poter ottenere un buon punteggio finale.

La cloche serve a comandare il treno. Trascinandola verso l’alto si aumenta la potenza, verso il basso si applicano
i freni. I dati sono indicati nel display.

Il pulsante di sinistra apre le porte. Da azionare solo a treno fermo ed in stazione.
Il pulsante di destra attiva la sirena di chiusura porte da attivare sempre prima di chiudere le porte.

Display con le scritte verdi
Potenza
Freni
Velocità
Limite
Km percorsi
Errori di manovra
Effetto spinta
G+
G-
Stress passeggeri
Utenti fermata
Utenti totali
Prossima fermata in
Ritardo

, ,
Avatar photo

About Pino Silvestri

Pino Silvestri, blogger per diletto, fondatore, autore di Virtualblognews, presente su Facebook e Twitter.
View all posts by Pino Silvestri →

2 thoughts on “Spettacolare simulatore, ti permette di guidare la linea M3 della metropolitana di Milano

Lascia un commento